Description of Gear Hobbing Workpiece
2021-12-16 08:51:59
jiangxingTools
3201
Description of Gear Hobbing Workpiece
1) Module
2) Pressure angle
3) Helix angle
4) Number of teeth
5) Tip diameter
6) Root diameter or toot height
7) Profile displacement factor or standards for setting the tooth thickness
8) Gear width
9) Material and tensile strength
10) Number of workpiece to be machined, lot size, if applicable
相關文章
-
Timing Pulley Hob for STS 3M
Timing Pulley Hob for STS 3Mtiming belt profile: STSbelt type: 3Mcommon range: 16-25T, 26-80Thob siz... - PA20° Pre-shave Gear Hob with Module m6.5
- Hobs for worm gears
- Nominal PCD 180mm M1.25 Gear Shaving Cutter with PA20°
- HSS gear hob cutter with relief ground DIN 8002 B
- PA20° Module m2.5 Standard Involute Gear Hob
- HSS M2 Material for Gear Cutting Tools and Gear Hob
