Processing Steps for Carbide Gear Hobs
2022-08-18 10:47:06
jiangxingTools
2394
Processing Steps for Carbide Gear Hobs
Chongqing Jiangxing Tools is supplying carbide gear hobs with module m0.5-m3, in P, M, K series type materials.
1), Raw carbide material
2), Inside diameter grinding
3), End face grinding
4), Hub grinding
5), Tooth groove grinding
6), Tooth profile grinding
相關文章
- PA20° Profile DIN3972 Standard Pre-grinding Gear Cutter Hob with Module m3.75
- Taper Shank Type Shaper Cutters with GB 6081
- PA20° Module m3.25 Standard Involute Gear Hobbing
- GB Standard Gear Hob with Module m1-m10
- PA20° PCD 200mm Disc Type Gear Shaper Cutter with Module m8~m12
- PM-HSS ASP2030, ASP2052, S390 Module Gear Shaper Cutter with AP Coating
- PM-HSS ASP2052 for Shaper Cutter and Gear Hob Cutter

