Solid Carbide Hob
2022-11-03 10:00:08
jiangxingTools
2664
Solid Carbide Hob
Processing step for tungsten carbide gear hob cutter as following:
step o1-raw carbide material
step 02-inside diameter
step 03-end face grinding
step 04-hub grinding
step 05-tooth groove grinding
step 06-tooth profile grinding
step 07-final inspection
step 08-coating
相關文章
-
The Method of Hob Computation
The Method of Hob ComputationNormal pitch=Mn x Π（Mn: Normal Module)Axial pitch=Mn/cos LALead=Axial p... - HSS Precision Gear Shaper Cutters
- Hobs for parallel side splines
- PA20° Standard Gear Milling Cutter with Module m4.5
- K40,K42, K44 Carbide Standard Gear Hob with Topping or Non-Topping
- Hob Cutter Sharpening
- Bohler S590 Microclean for Hobs
