Taper Shank Type Shaper Cutters with DIN 1828
2023-03-26 14:07:45
jiangxingTools
2316
Taper Shank Type Shaper Cutters with DIN 1828
These shaper cutters are 20° PA, non-topping finishing cutters for straight spur gears,
tooth profile of shaper cutters is according to DIN 3972 profile Ⅱ，
there is no center hole on cutting face end of shaper cutter.
More taper is No. 2 and No.4 for above shank type shaper cutters.
相關(guān)文章
-
PA20° PCD 125mm Disk Type Gear Shaping Cutter with Module m4~m8
PA20° PCD 125mm Disk Type Gear Shaping Cutter with Module m4~m8Material：HSS M2,M35, M42, S390Module:... - PA20° Pre-shaving Gear Hob Cutter with Module m1.75
- ?PA30° PCD 25mm Shank Type Gear Shaper Cutter with Module m1~m3
- PA20° DP6 Standard Gear Hobber Cutter with BPⅡ
- PA30° DIN5480 Involute Spline Gear Hob with Module m3.5
- PA20° Profile DIN3972 Standard Pre-grinding Gear Hobbing Cutter with Module m2.25
- Timing Pulley Hob for (AT.)D.T (D)T5
